Installation Manual Part 4

FCC ID: COG-ARTU

MAGNASTAR

EXHlBITC

C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM

Select the de. ired inplane number

The inplane number will then be

Highlighted.

~--

Enter No

select

-->

Select

-->

Go Back >1

7.1.2..6.7 MODEM Settings

4800 bps and 9600 bps MODEM call bandoffs between ground stations can be independently enabled or disabled as a system

function (i.e. for the entire aircraft) from a maintenance menu. 9600 bps MODEM call handoffs are enabled as the factory

default and 4800 bps MODEM calls handoffs are disabled as the factory default. Each handset and CDBR-2 port may be

configured independently wjth a different default rate (4800 or 9600 bps). Note: Ground-Air MODEM eatls (i.e. upealls)

are Dot supported.

Select 5

for Modem

-->

Select the appropriate

number to choose the

station baud rate and to

enable or disable handoffs

CUrrent selection will

be highlighted.

7.1.2.6.8 Handset Attributes

The remaining maintenance screens are referred to as handset attributes. These include gains settings, call alerter functions,

and LED settings. These screen are reached by successively pressing "+" for roore from the second maintenance screen.

RevS

7.18