Installation Manual Part 4

EXHIBrrc
C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
FCC ill: CDG-ARTU
MAGNASTAR
For MagnaStar systems that are interfaced to a SA TCOM unit, it is possible to configure each station to use either the GTE
Airfone ground network or the SA TCOM satellite system as the default link. The default link is station programmable. The
MagnaStar system default is the GTE Airfone system (Air to Ground).
The MagnaStar system also provides the capability to automatically route calls between the GTE Airfone and the SA TCOM
system, if the default link is being used to capacity, or is not available for use. This feature is called Auto Link Switching.
The Auto Link Switch feature is a system function and can be programmed from anyone handset.
Select the appropriate Default Link
The current Default Link will be
highlighted.
Select 4
for Link
-->
Select 3 to enable or disable the Auto
Link SWitch feature.
If the Auto Link SWitch feature is
enabled, then -To Disable- will appear
on the screen. If the Auto Link SWitch
feature is disabled, then - To Enable-
will appear on the screen.
7.1.2.6.6 Service Availability and Call In Progress Indieaton
CAS (Call Alerter Switch) output switch 0 can be programmed to close to indicate when any or all of the following services
are available: Air-Ground, GroundCell, SA TCOM. CAS oUtput switch 9 can be Progranuned to close to indicate when a
selected handset(s) or CDBR-2 port(s) have a call in progress through one of the available service links. NOTE: The t'In
Use" indicator on the Inplane Calling Menu indicates which handsets or CDBR-2 ports are off-hook. If CAS output switches
9 and 0 are used as indicators they can IK>t be used to signal the user of an incoming call.
---
CASO
service
Indicator:
Select
+
-->
Select
1
-->
Select
4
-->
Air and >1
GndCell >2
Satcom ->3
More --->+
Go Qack >t
Select
Number
Of Service.
Selection
Will be
Highlighted
7-17
Rev 8