Installation Manual Part 4

FCC ill: CDG-ARTU
MAGNASTAR
EXHIB rr c
C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
The higher rate feature may be~tQgg1ed to display
-Enable- or -Disable. by entering a keypress
of 1.
~..;;;-
Warning: The Enable or Disable shown on the
screen describes the state the system will be
placed when 1 is pressed. This screen indicates
that the higher rate PAX Aero-H+ Satcom dialing
prefix is enabled.
7.1.1.6.3 Ringer Enable/Disable ~::,,'
A digital handset and the associated external call alerter switch outputs configured for that handset can be disabled.
The ringer feature may be toggled to display
-enable- or -disable- by entering a keypress
of 2.
Warning: The Enable or Disable shown on the
screen describes the state the system will be
placed when 2 is pressed. This screen indicated
that the ringer feature is enabled.
The current state of the ringer can always be
viewed with the use of the information screens
from the setup menu.
7.1.2.6.4 Dialing Plan
The C-2000 system can be configured for one of two possible dialing plans; United States & Canada or Mexico. The system
is programmed not to require the user to enter dialed numbers in the international dialing format when placing calls to either
the US & Canada or Mexico, dependent on the setting of the dialing plan. However, the international dialing format can
always be used. The appropriate dialing format must be identified to simplify dial operation. All numbers dialed outside the
identified dialing plan requires use of the international format. The dialing plan default value is US/Canada.
uSj-
~na~
Mexico
>1
.>2
Se1
to
thE
Pl!
Select the appropriate
nwnber for the required
dialing plan.
To Enable
Aero-I/H+
Satcom
Dialing
Prefix-»
The current value will be
highlighted.
Go Back >t
7.1.2.6.5 Default Link and Auto Link Switch
7-16
RevB
.ect 3
change
t Dialing
~n.
.>