Installation Manual Part 4

ManualsBrandsRaytheon IIS ManualsElectronicsAir-Ground Radio System

FCC ID: CDG-ARTU

MAGNASTAR

EXHIB IT C

C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM

configure

Impedance

~~~~~~~i

Select 1

for SAreOM

-->

Make the

appropriate

selection to

match the

aircraft

configuration

Select 6

for AIU.

-->

Satcom -->1

Mode

Handset >3

~---~>2

SatcODl /

GroundCell

Select-->3

Go Back >1

The current

configuration

will be

highlighted.

7.1.2.5.8 AIU Configuration - OF Radio

The following screen progressions show the options available for configuring the AIU when used for HF Radio or other

analog audio type interfaces. The AIU HF Radio function features the ability to enable/disable the voice operated (VOX)

push to talk (PTf) switch function. Disabling the PTf will automatically connect the handset microphone to the AIU analog

audio output when the HF Radio (or other label name) option is selected by the user. There are also two audio adjustments

that can be made from these screens. The Decay adjustment will vary the amount of time that the PTT will be kept active

after the analog input falls below the VOX threshold. The Sense adjustment will vary the sensitivity of the VOX PTf. All

three of these options are system functions and as such only need to be programmed from one handset. It is possible to

assign a label other than HF Radio. The HF Radio label is the system default label.

confi~

select 6

for AIU.

-->

Select 2

for HP Radio

-->

Satcom -->1

HF Radio >2

Passcode

Charige > 1

Charge

Direct >2

Credit >3

Phone I >4

Speed Dial

Setup ->*

Delete >5

AIU >6

More --->+

Main --->1

Satcom /

GroundCell

Select-->3

Go Back >1

Press '5'

to pick a

character

list.

Enter an 8

character label

to modify the

HF Radio label.

The PTT enable

/disable option

displays what

result will be

progranuned when

* is pressed.

You may

enter an 8

character

label.

HF Radio

Select 0 to view

the help screen.

--->

Press '6'

or '4' to

move up or-

down the

list.Select + to

change the HP

Radio label.

-->

Cursor ->.*

OK >.

Help --->0

Go Back >*

Press * to move

the cursor.

Press' to enter

label.

7.1.2.6 Maintenance Screen #2

The second maintenance screen allows the wer to change the station setup. to enable/disable the handset ringer. to select the

dialing plan, select the system default link, select the station MODEM default baud rate and to enable/disable MODEM call

hand-offs.. The second maintenance screen is shown below:

RevB

7~.3