Installation Manual Part 3

FCC ID: CDG-ARTU
MAGNASTAR
EXHIBIT C
C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
7.1.2 DETAILED CONFIGURATION SCREENS
The following section provides information about the individual configuration screens. This section is intended to provide
the installer with a visual reference to the configuration screens and is supplemental information to the user guide. However
it is not intended as a replacement for the user guide.
7.1.2.1 Services Screen
The following screen is the Services screen. Whenever a digital handset is in the "on-hook" configuration, the following
screen will be displayed. This screen displays the calling feature that the system is configured to support; i.e. including
Inplane, Air-to-Ground, GroundCeIl, SATCOM or HF Radio. The current default link will be highlighted. This screen may
also display thc tcxt "Messages" to indicate that there are aircall number(s) stored in memory. The inplane, Station aircall
and station terminal ID numbers may also be displayed on the Services screen.
7.1.2.2 Main Menu
Taking the handset "off-hook" will place the user at the main menu screen. The main menu screen provides the user with all
the calling options. Additionally, the set-up and aircall options are reached from the main menu.
A digital handset has a built in Hall Effect switch which is activated by a magnet. If a digital handset is taken out of a holder
that is equipped with a magnet, then the main menu screen will appear after five seconds. However, during this five second
period the main menu screen is active and numbers or functions can be selected even though the screen may not have
changed. If a digital handset holder does not have a magnet, the handset must be taken "off-hook" by pressing the "+" key.
7-5 RevB