Manualshelf

Installation Manual Part 2

ManualsBrandsRaytheon IIS ManualsElectronicsAir-Ground Radio System
12345678910
FCC ID: CDG-ARTU
MAGNASTAR
EXHlBrrc
C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
6.0 EQUIPMENT CHECKOUT WITH MAGNASTAR MAINTENANCE TERMINAL (MMT)
6.1 INTRODUCTION
The MagnaStar Maintenance Terminal (MMT) consists of a laptop computer executing application
software. The MMT is connected to the ARTU via the computer's serial port. The MMT is used
to control the ARTU and monitor its functions. The MMT software includes an Installation
Tutorial. This tutorial is a step-by-step procedural test that verifies the C-2000 installation. When
the tutorial runs a particular test, a description of the test, the expected results of the test, and the
actual results of the test will be displayed to the user. A troubleshoot screen is also available with
each test step that provides a short description of steps to use for troubleshooting the system.
The MMT is a very powerful tool for verifying and troubleshooting a MagnaStar C-2000
installation.
This section of the equipment checkout provides a text description for each individual test step of
the MMT and a procedure with the necessary steps to accomplish each test step. The text
describing the necessary steps to perform each test are shown in bold print.
Cable checkout, Section 4.0, and equipment installation, Section 5.0, should be completed before
starting this section. Troubleshooting procedures screens are available while using the MMTI.
These screens and troubleshooting information can be found in Section 9.0.
The following MMTI screen information corresponds with MMTI software version 4.0.A.
6.2 TEST EQUIPMENT REQUIREMENTS
The following list defines the test equipment necessary to completely check the functionality of
the C-2000 system using the MagnaStar Maintenance Terminal.
1) MagnaStar MMT Installation software version 4.0 (MX 902156)
2) 386 or 486 IBM compatible computer with 4 Megabytes of extended RAM
3) Power Meter or Thru-line Watt meter for 895 MHz (20 watt minimum capability @ 900 MHz)
4) MMT cable (MX 422632-801)
5) MagnaStar Loop-Around Test Set (MX 902185-802)
6-:
RevS