Installation Manual Part 1

FCC ill: CDG-ARTU
MAGNASTAR
EXHIBIT C
C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
Tray cable.
d) Check that the dust cap is properly secured to the J3 connector (MMT) of the ARTU.
e) Verify that there are no airflow restrictions at the top of the ARTU.
f) Verify that the Receive coaxial cable is connected from the Receive port (RCV - J4)
of the
ARTU to the Receive port (RCV - J3) of the Duplexer.
g) Verify that the Transmit coaxial cable is connected from the Transmit port (XMT - J5)
of the
ARTU to the Transmit port (XMT - J1) of the Duplexer.
5-2 RevS