Installation Manual Part 1

FCC ill: CDG-ARTU
MAGNASTAR
EXHIBITC
C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
3.0
UNPACKING AND INSPECTING EQUIPMENT
Physically compare the presence of each item in the shipment with that shown on the packing list. Exercise
care when unpacking each unit. Make a visual inspection of each unit for evidence of damage incurred
during shipment. If a claim for damage is to be made, save the shipping container to substantiate the claim
Antenna:
The Antenna will be marked with the manufacturer's part nwnber as follows:
MagnaStar
Part Number
Dorne & Margolin Inc.
Part Number
Description
902131-1
902131-2
OM N124-19-1
OM N124-18-1
6 Hole Antenna
4 Hole Antenna
Digital Handsets:
MagnaStar digital handsets, part numbers 724866-805XX, -806XX, -808XX, and -81 OX:)(. are shipped
with a stronger spring and installation instructions. This spring is recommended for use in installations
where the handsets are mounted horizontally. The spring is a stronger spring which will make removing
the handset from the bezel easier. The part number for the spring is LC-O21AB-IOMW
Connector Kits:
The ARTU, AIU, CDBR-I, and CDBR-2 are shipped with connector kits. These connector kits are
contained within the unit shipping package. The connector kits provide most of the connectors required to
interface these units to other devices. Refer to section 3.3 of the Interface Control Document (ICD) in
Appendix B of the MagnaStar Installation Manual for a list of connector kit parts.
The connector kits are also accompanied by a connector kit drawing. This document provides assembly
instructions describing cable construction steps. Copies of these drawing can be found in section 4 of the
MagnaStar Installation Manual.
ARTU Shipping Items:
Within the ARTU packaging, several items are shipped with the unit. The items are as follows:
- ARTU Connector Kit (pIN 744319-802).
- C-2000 User Guide.
- GTE Airfone Service Agreement.
- GTE Airfone Equipment Exchange Form.
AEA Warranty Registration Form.
Contains mating connectors for the ARTU.
The C-2000 User Guide is to be provided to the
customer. For additional copies call the StarLine.
To be completed with the customer. See Dealers
Manual for detailed information.
Only required for ARTU equipment exchange after
customer takes delivery of system. See Dealers
Manual for detailed information.
To be filled out by the customer and sent to the
MagnaStar manufacturer.
3-1
RevB