User's Manual
Table Of Contents
- 1 REGULATORY AND SAFETY INFORMATION
- 2 PREFACE
- 3 SPECIFICATIONS
- 4 GENERAL INFORMATION
- 5 OPERATION
- 5.1 CONVENTIONAL STATION CONFIGURATIONS
- 5.2 ENCRYPTED STATION CONFIGURATIONS
- 5.3 MODES OF OPERATION
- 5.4 ENCRYPTION FORMATS
- 5.5 P25 CONVENTIONAL CONFIGURATIONS
- 5.6 PROGRAMMABLE FEATURES FOR CONVENTIONAL STATIONS
- 5.6.1 Conventional Stations (Setup)
- 5.6.2 Main Station Data
- 5.6.3 Push-to-Talk Options
- 5.6.4 Other Potentiometer Settings
- 5.6.5 Carrier Control Timer
- 5.6.6 Squelch Tail Elimination
- 5.6.7 Drop Out Delay Timer
- 5.6.8 Control Shelf Options
- 5.6.9 Station Remote Control
- 5.6.10 Auxiliary Control Relay
- 5.6.11 Squelch Operated Relay
- 5.6.12 Channel Guard Monitor
- 5.6.13 System Module - Digital Signal Processing
- 6 MASTR III ADC STATION DESCRIPTION
MM102558V1 R1A
Table 4-3: MASTR III ADC Conventional Station Options and Accessories
OPTIONS AND ACCESSORIES
OPTION DESCRIPTION
ENCRYPTION/DECRYPTION MODE FOR REMOTE OR REMOTE/REPEATER
(ENCRYPTED MASTR III STATIONS ONLY)
SXVG3D KIT, DES 1027 ENCRYPTION SHELF (INCLUDES GETC). Same as Option SXVV1N except uses DES
algorithm.
SXVW1J KIT, DES ENCRYPTION SHELF (INCLUDES GETC). Same as Option SXVV1N except uses DES algorithm.
SXVV1N KIT, VGE ENCRYPTION SHELF (INCLUDES GETC). Provides encryption/decryption in a tone remote/repeat
station. Module is remotely controlled using function tones. VGE algorithm version.
REMOTE OR REMOTE/REPEATER (FOR UNENCRYPTED MASTR III STATIONS ONLY)
SXVV1S KIT, AEGIS UNENCRYPTED SHELF (INCLUDES GETC). Provides non-encrypted Aegis digital
communications in a tone remote/repeat station. Module is remotely controlled using function tones.
HARDWARE, OPTIONS AND ACCESSORIES
SXCA1U CABINET, 83 IN.
SXCA1D CABINET, 69 IN.
SXCA1S CABINET, 37 IN.
SXMR1D OPEN RACK, 86 IN.
SXCA1X CABINET, 45 IN., OUTDOOR
SXMN2B OPTION, NO CABINET
SXFN1A FAN, 120 VAC, Must be included when installing more than 1 repeater in a 69- or 83-inch cabinet.
SXFA1L FAN, 230 VAC, Must be included when installing more than 1 repeater in a 69- or 83-inch cabinet.
SXFA1N FAN, 12 VDC, Must be included when installing more than 1 repeater in a 69- or 83-inch cabinet.
SXCN1Z OUTLET STRIP, 120 VAC
SXMN9H COVER, CABINET TOP, 69/83 IN. CABINET (CONVENTIONAL)
SXMN7F KIT, MOUNTING HARDWARE, 37 IN. CABINET
SXMN3Y KIT, MOUNTING HARDWARE, 69/83/86 IN. CABINET/RACK
SXMN9C COVER, SCREEN, T/R SHELF
22