User's Manual

P25net Channel Controller Operations Manual
3-8
3.9.2 Initial Steps
3.9.2.1 Set the Radio Test Set to analog duplex mode and program for the
frequency of the transmitter.
3.9.2.2 Power up the radio and P25net CC.
3.9.2.3 Launch PCCT and connect to the P25net CC channel.
3.9.3 Radio Tx Calibration
3.9.3.1 In PCCT go to the Configure >Tx window and set default values for the Tx
parameters as shown in Figure 3-9
Figure 3-9 Configure Tx Window