User's Manual

Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition Sep 2015
2-9
4265.DOC020102
Operator controls
Text identifier
Text line with slider (used for SET and DRIFT values.
Position the cursor on the text line value field, press and
hold left trackball button until the slider symbol appears
(yellow rectangle) below the toggle field.
The slider can be moved into the aimed direction using
the trackball.
In parallel, the numerical value above the slider changes.
Press the left button again to complete the setting or
wait for the time out.
Sliders
Position the cursor on the slider for the requested
function (e.g. GAIN).
Press the left button, move the trackball.
The slider is moved to the right or the left, in response to
the trackball command (the tuning bar display will
automatically update the setting). The slider setting is
immediately effecting the Radar video.
Deselect the slider adjustment by pressing the left
button again or wait for the time out (10s), then the slider
adjustment will deselect automatically
Slider treated as transient values.
Transient values cease to be valid
after switching to STBY or switching
off the unit. When the unit is
switched on again, the sliders are
reset to their default values.