User's Manual

Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition Sep 2015
2-3
4265.DOC020102
Pos. No.
Task
position is activated.
2
This button has no function.
3
This button is used for Pick up and drag operations and for
deleting ARPA or AIS targets and is used for the MFC Switch,
opening the Context Menu.
Normally this button is used on the Radar video to pick up a
symbol (e.g. EBL/VRM) and drag the symbol to a new position
within the Radar video using the trackball.
Press the left trackball button to release the symbol.
Select a ARPA/AIS target;
Place the cursor over an ARPA target and press the right
button.
In this case a context menu appears for approx. 10s. With
pressing the right button again target is selected.
Delete a ARPA/AIS target;
Place the cursor over an ARPA target and press the right
button. In this case a context menu appears for approx. 10s.
Select “Delete Target (ID …) and press the right button.
This action is not possible when the AIS INFO display was
selected before or when you are working with the ARPA ZONE
functions or another FUNCtion sub menu.
MFC switch and Context Menu;
Call up the MFC Switch, place the cursor over the “Raytheon
Anschütz” field and press the right button.