User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-226
Edition Sep 2015
ALARM MESSAGE
a) Problem Description
b) Corrective Action
SLOW ANTENNA
a) Antenna System is disturbed.
A signal from transceiver/adaptive
interface which indicates the antenna is
not rotating at the correct RPM.
b) Start the Radar System again.
Refer to the maintenance section for
troubleshooting and repair.
Call Service
SYSTEM UNSTABILIZED
(SYSTEM UNSTABILIZED
ALARM)
a) Course information has become
inoperative. Indicates that an invalid
signal has been received.
b) Check the Gyro Compass information in
the Navigational System.
Start the Radar System again.
Refer to the maintenance section for
troubleshooting and repair.
Call Service.
TRANSCEIVER
PROTOCOL VERSION
MISMATCH.
TRANSCEIVER VERSION:
>>VERSION<<
a) The Communication protocol version of
the Radar transceiver does not match
the protocol version expected by the
Synapsis Radar software.
b) The Synapsis Radar software has to be
updated. Call Service.
TN INDICATOR ERROR
(Radar Transceiver TN
INDICATOR ER- ROR
ALARM)
TN Tune
a) External alarm from Radar Transceiver.
b) Start the Radar System again.
Refer to the maintenance section for
troubleshooting and repair.
Call Service.
VIDEO TRANSFER
a) External alarm from Transceiver no
connection between computer and
transceiver
b) Call Service.