User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition Sep 2015
2-203
4265.DOC020102
Radar Procedure:
Operator controls
Task
Step 1 Open the FUNC menu.
Step 2 Select the SENC button.
Step 3 Switching over between SENC ON and OFF
function. SENC ON means all objects are presented on
the PPI. SENC OFF means no objects are presented on
the PPI.
Step 4 SENC CONFIG provides following functions
DELETE ALL.
All objects are deleted from the Radar PPI and from the
Radar storage.
ADJUST (RADAR FIX)
The amount of change is expressed in the change of
Latitude and Longitude from the original position. Use this
when position is very poor (e.g. Loran C), or when no
sensor is available (for example when auto drift is in use
to Dead Reckon the ship’s progress using Radar).
Do not use with GPS.
CANCEL FIX
If the Radar Fix is no longer required.
LINE MENU
The Line Menu provides a means for the operator to
select line styles to be displayed when interfacing the
Radar to an ECDIS.
ALL LINES ON/OFF
All feature of the LINE MENU are ON (default settings).
MARK MENU
The MARK MENU provides a means for operator to select