User's Manual

Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-220
Edition July 2015
Procedure without ARPA TRIAL Function
Operator controls
Task
Step 1 Select the ARPA TRIAL button. The Trial
Manoeuvre window will open.
Step 2 Select the INACTIVE button for changing to the
ACTIVE situation. The actual SPD, CSE, DELAY and
RADIUS values appear.
Step 3 For changing the values, press and hold the left
trackball button until the text line with slider appears.
Using the trackball the relevant parameter value is
changed. Follow the display changes. Press the left
trackball button again, the process stops.
Step 4 Select the SEA SCOUT button to fade- out or fade-
in the “No- Go Areas“.
Step 5 Select CNTDWN soft button for starting the ARPA
TRIAL scenario. Exit the TRIAL MANOEUVRE by
selecting the EXIT soft button. Exit the SEA SCOUT
function by selecting the SEA SCOUT button.