User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-88
Edition July 2015
2.3.4.1.(3) Map Menu – EXCHANGE –
EXCHANGE
This function allows MAPs created on the Radar to be imported and exported.
A USB stick can be used as a portable storage medium.
The USB port is located at the front of the Remote Panel or of the Console.
Operator controls
Task
Step 1 Select the MAP MENU soft button the menu
appears in the functions display.
Step 2 Select the EXCHANGE MAPS soft button the
menu appears in the functions display.
Step 3 Insert the USB stick into USB port.
Step 4 Press the REFRESH soft button; the processor
automatically detects the USB stick.
Step 5 Select the intended operation.
EXPORT – All MAPs retained in the Radar MAP memory
are transferred onto the USB stick.
IMPORT – All MAPs stored on the USB stick are
transferred to the Radar memory.
Step 6 Press the EJECT DEVICE soft button; the
processor automatically completes the operation.
To prevent possible data loss, ensure that the EJECT
DEVICE soft button is pressed before removing the USB
stick!