User's Manual Part 2

Operator Manual
2−114
3748DOC020102 Edition: 14.JAN.2005
Editing an INDEX LINE
The index lines can be edited by way of their index points.
Procedure: (see Figure: 2−67)
Step 1 Open SELECT mode for INDEX LINE
Step 2 Select INDEX LINE using trackball and press Right button.
The INDEX LINE display changes and both points are shown.
The EDIT function is activated.
Step 3 Open the EDIT INDEX LINE display
Select the desired point using the trackball and press the Right button.
The current position is shown in the EDIT NAV LINE (bearing and
distance) display.
Step 4 Determine the new position and drop by pressing the Left button.
Step 1
Step 3
Step 2
Figure: 2−68 Editing an INDEX LINE