User's Manual Part 1

127.9°
EBL1
T
OFFSET
Operator Manual
2−48
3748DOC020102 Edition: 14.JAN.2005
Use the cursor to move the bearing line or the range marker.
Place the cursor on the EBL or VRM. Press the Right button on the trackball to
pick up and drag the EBL or VRM.
Press the Left button on the trackball to drop the EBL or VRM at the desired
position.
The OFFSET allows the EBL1 root point and the VRM1 origin to be moved
anywhere within the radar video as an EBL/VRM group.
NOTE
If the floating function is canceled, the point of origin of the EBL/VRM is
reset to the image center!
2.3.4.2 Editing EBL and VRM
The EBL and/or VRM can be placed and changed using the cursor or the
operator panel (see Figure: 2−26).
When using the operator panel, you are restricted to the EBL1 and VRM1 group.
The NSC provides 3 options for editing the EBL/VRM, which can be used
comprehensively as required.
Cursor
In this example, the EBL1 is shown, starting from the current position of the ship.
Position the cursor on the desired target and press the Right trackball button.
This places EBL1.
Select the Offset toggle field if EBL1 is to be moved parallel.
Pressing the Left button moves EBL1 to the new position.
The bearing and the variable range area can be changed at any time.