User's Manual Part 1

Tx
Left
STBY
EXIT
RADAR
Left
Operator Manual
2−22
3748DOC020102 Edition: 14.JAN.2005
2.2.6 Switching OFF the NSC radar system
The following procedure should be used to switch off the NSC radar system.
Procedure:
Switching the radar OFF
Using the trackball, place the cursor on the TX softkey and press the
button from the trackball group.
The name of the softkey changes to STBY and is highlighted.
− radar echo disappears
− the antenna stops, no transmission
− the name of the softkey FUNC changes to SERV (Service).
− the softkey EXIT RADAR appears
Pressing this softkey the RADAR Utility selector appears
Select Operator Close System and Power Off in the RADAR Utility selector
window and press the button from the trackball again.
Operator Change Date/Time
Operator Close System and Power Off
Operator Refresh Radar
Service Switch to Admin + password
Service Report Export to USB
Service Raytheon Update from USB memory
Service Display Resolution
Service Display Network
+++ RADAR Utility selector +++
Utility Selections
Run Selection
RADAR
Figure: 2−13 RADAR Utility selector
Operator Change Date/Time
Operator Close System and Power Off
Operator Refresh Radar
Service Switch to Admin + password
Service Report Export to USB
Service Raytheon Update from USB memory
Service Display Resolution
Service Display Network
+++ RADAR Utility selector +++
Utility Selections
Run Selection
RADAR