User's Manual Part 1

Peak item
Power ON/OFF
button
Reset
Dip
Switch
Operator Manual
Raytheon Marine GmbH
Germany
R
NSC 18
RADAR
2−21
3748DOC020102Edition: 14.JAN.2005
2.2.5 System reset
When a system reset is carried out, only the NSC software is re−initialized; the
transceiver remains actuated.
Procedure:
Trigger the system reset. Press the dipswitch briefly with a pointed object.
The display turns dark briefly and the system is re−initialized.
The NSC display appears with the following basic settings.
After any restart, the NSC display unit makes certain basic settings. These
include
− TUNE in AUTO mode
− GAIN in center position
− SEA in 0 position
− RAIN in 0 position
− FTC in 0 position
− DIMMER in max. position
− Range in 6NM
− Vector at 6.0 min