Vario IP PoE Series Instructions

www.rayteccctv.com 6
Raytec Global Tel: [phone]
Raytec Americas Tel: [phone]
Introduction
VARIO IP PoE is a Network Illuminator designed to connect to any suitable network and is
provided with an integrated Web Interface. The product is delivered with a Discovery Tool
Application for easy identification and connection to the lamp on the network. You can also
connect directly to the lamp by typing its IP address into a web browser. An API is also
available for easy integration within a VMS environment.
The lamp has Operator and Administrator log-on and access rights. The Operator has
access to the Homepage/Instant Control and Diagnostic pages. The Administrator has
access to all pages.
Initial Setup
Ethernet Cable
Cat5e (or better) – using the T-568B wiring standard. See connection on page 2
Multi-core Power & Signal Cable
QUICK START
Select required angle for lamp. Standard angle is 35°. Change angle as required (see page
2).
Attach lamp to wall, housing or pole using U-bracket provided or dedicated Raytec bracketry.
Connect lamp to PSE and network using waterproof connector provided or separate junction
box. See page 2 for diagrams.
To use Auxiliary Power, connect lamp to 24V DC (50W required for VAR-IPPOE-w8-1, i8-1
and i8-1-c, 25.5W required for VAR-IPPOE-w4-1, i4-1 and i4-1-c) and apply power to the
lamp.
We strongly recommend that you load the Discovery Application onto your computer - and
then run it - with the VARIO IP powered and attached to the same network as your
computer.Press Discover – and the Discovery Tool will display a list of lamps available on
the network. You can double click onto the lamp from the Discovery Tool to navigate directly
to the lamp. The default IP address of the product: 192.168.2.80 - which is likely to be
outside of your network range.
Colour
Description
Wire Gauge (AWG)
w8-1, i8-1, i8-1-c
w4-1, i4-1, i4-1-c
Red
+ve Auxiliary Power
18
22
Black
-ve Auxiliary Power
18
22
Orange
External Input (Only if TTL:
+ve)
22
22
Purple
External Input (Only if TTL:
GND)
22
22
Yellow
External Output
22
22
White
External Output
22
22