Vario IP PoE Series Instructions

www.rayteccctv.com 3
Raytec Global Tel: [phone]
Raytec Americas Tel: [phone]
Changing Interchangeable Lenses
To alter the angle of your lamp – see the drawings above.
The lamp is delivered with a 35
o
angle. To alter to 10
o
, remove the baseplate from the
bottom of the product and remove the existing lens and then re-attach the baseplate.
To alter to any other angle, remove the existing lens and insert the required lens (which will
have its angle indicated). Ensure the baseplate is securely re-attached to maintain
waterproof integrity of the product.
POE Detection Resistance Selection Switch
There is a switch on the VAR-IPPOE-w8-1, i8-1 and i8-1-c lamps which can be used to
change the POE detection resistance of the lamp.
Turn the power to the lamp OFF, remove the baseplate and access the switch as shown.
The majority of PSE equipment requires a detection resistance of 24.9KΩ to establish a
POE link. Some Phihong brand PSE equipment requires a 12.5KΩ detection resistance.
For 24.9 KΩ, slide switch to the LEFT (as shown). For 12.5 KΩ, slide switch to the RIGHT.
Detection Resistance Selection Switch