Vario IP PoE Series Instructions

www.rayteccctv.com 22
Raytec Global Tel: +44 (0) 1670 520055
Raytec Americas Tel: +1 613 270 9990
Traditional SOS pattern 3 short on/off, 3 longer on/off, 3 short on/off
Wave The lamp slowly ramps up and down from 100% to 20%
Hi-Lo The lamp alternates between 100% and 20% setting
Factory Defaults: SOS
There are 3 selectable deterrent speeds available; Slow, Medium, Fast
Factory Defaults: Slow
Countdown Duration of Override
There are 4 selectable durations from a drop down list for the Countdown Duration of the
Manual Override feature on the home page.
Factory Defaults: 30 minutes
External Input Select type of Input & Active State on Input
The External Input wires will accept either volt free or TTL inputs see polarity on wiring
instructions on page 2. The correct type of input must be selected from the drop down list to
match the input to ensure correct operation.
Factory Defaults: Volt free
Factory Defaults: Short Circuit/Low
Advanced settings- External Output
The External Output is a volt free open/closed output.