User`s manual

3.3.31 Management – Watchdog

This page is used to do watchdog function using ping command. User set IP

address, interval and ping fail count conditions to decide whether router reboots

or not.

Item Description

Enable WatchDog Click to enable watchdog.

WatchDog IP Address IP address that is referred.

Ping Interval Fill in the value by seconds.

Ping Fail to reboot Count Fill in the value that is the threshold to reboot

router when ping fails.

Apply Changes

Click the Apply Changes button to complete

the new configuration setting.

Reset

Click the Reset button to abort change and

recover the previous configuration setting.

3.3.32 Management - Reboot

This page is used to reboot the device.