User`s manual

3.3.21 Routing Setup

This page is used to edit static route entry and disable NAT. This feature is

available only on RA-M100Plus and firmware starting from u2.3.0.3.R00.

Item Description

Enable Static Route Click to enable the Static Route.

IP Address: Insert the destination IP Address or Network.

Subnet Mask Insert the destination Subnet Mask.

Default Gateway Insert the Default Gateway within the source Network.

Apply Changes

Click the Apply Changes button to add settings to the

list.

Reset

Click the Reset button to abort change and recover the

previous configuration setting.

Show Route Table This table shows all the routing entry.