User`s manual

IP Address If you select the L2TP support on WAN interface, fill

in the IP address for it.

Subnet Mask If you select the L2TP support on WAN interface, fill

in the subnet mask for it.

Gateway If you select the Static L2TP support on WAN

interface, fill in the gateway for WAN interface out

going data packets.

Server IP Address Enter the IP address of the L2TP Server.

User Name If you select the L2TP support on WAN interface, fill

in the user name and password to login the L2TP

server.

Password f you select the L2TP support on WAN interface, fill

in the user name and password to login the L2TP

server.

Connection Type Select the connection type from pull-down menu.

There are Continuous, Connect on Demand and

Manual three types to select.

Continuous connection type means to setup the

connection through L2TP protocol whenever this

WLAN Broadband Router is powered on.

Connect on Demand connection type means to

setup the connection through L2TP protocol

whenever you send the data packets out through the

WAN interface; there are a watchdog implemented

to close the L2TP connection while there are no data

sent out longer than the idle time set.

Manual connection type means to setup the

connection through the L2TP protocol by clicking the

Connect button manually, and clicking the

Disconnect button manually.

Idle Time

If you select the L2TP and Connect on Demand

connection type, fill in the idle time for

auto-disconnect function. Value can be between 1

and 1000 minutes.

MTU Size Fill in the mtu size of MTU Size. The default value is

1460. Refer to 4.23 What is Maximum Transmission

Unit (MTU) Size?