User`s manual

Item Description

PPTP

llow user to make a tunnel with remote site directly

to secure the data transmission among the

connection. User can use embedded PPTP client

supported by this router to make a VPN connection.

Enable Dynamic

Mode

Click the checkbox to enable Dynamic PPTP

function.

IP Address If you select the PPTP support on WAN interface, fill

in the IP address for it.

Subnet Mask If you select the PPTP support on WAN interface, fill

in the subnet mask for it.

Server IP Address Enter the IP address of the PPTP Server.

Server Domain Name Input domain name to resolve DHCP server.

User Name If you select the PPTP support on WAN interface, fill

in the user name and password to login the PPTP

server.

Password If you select the PPTP support on WAN interface, fill

in the user name and password to login the PPTP

server.

Connection Type Select the connection type from pull-down menu.

There are Continuous, Connect on Demand and

Manual three types to select.

Continuous connection type means to setup the

connection through PPTP protocol whenever this

WLAN Broadband Router is powered on.

Connect on Demand connection type means to

setup the connection through PPTP protocol

whenever you send the data packets out through the

WAN interface; there are a watchdog implemented

to close the PPTP connection while there are no

data sent out longer than the idle time set.

Manual connection type means to setup the

connection through the PPTP protocol by clicking

the Connect button manually, and clicking the

Disconnect button manually.

Idle Time

If you select the PPTP and Connect on Demand