User`s manual

3.3.14 WAN Interface Setup

This page is used to configure the parameters for wide area network that

connects to the WAN port of your WLAN Broadband Router. Here you may

change the access method to Static IP, DHCP, PPPoE, PPTP or L2TP by click

the item value of WAN Access Type. RA-M100Plus also supports 3.5G WAN

connection.

I Static IP

Item Description

Static IP Click to select Static IP support on WAN interface. There

are IP address, subnet mask and default gateway settings

need to be done.

IP Address If you select the Static IP support on WAN interface, fill in