User`s manual

configuration setting.

Reset

Click the Reset button to abort change and recover the

previous configuration setting.

3.3.13 LAN Interface Setup

This page is used to configure the parameters for local area network that

connects to the LAN ports of your WLAN Broadband Router. Here you may

change the setting for IP address, subnet mask, DHCP, etc.

Item Description

IP Address Fill in the IP address of LAN interfaces of this WLAN

Access Point.

Subnet Mask Fill in the subnet mask of LAN interfaces of this WLAN

Access Point.

DHCP

Click to select Disabled, Client or Server in different

operation mode of wireless Access Point.

DHCP Client Range Fill in the start IP address and end IP address to allocate a

range of IP addresses; client with DHCP function set will

be assigned an IP address from the range.