User`s manual

3.3.6 Wireless - Security Setup

This page allows you setup the wireless security. Turn on WEP, WPA, WPA2 by

using encryption keys could prevent any unauthorized access to your wireless

network.

Item Description

Select SSID Select the SSID from multiple APs.

Encryption Select the encryption supported over wireless

access. The encryption method can be None, WEP,

WPA, WPA2 or WPA-Mixed. Refer to

4.9 What is WEP?

4.15 What is Wi-Fi Protected Access (WPA)?

4.16 What is WPA2?

Use 802.1x

Authentication

While Encryption is selected to be WEP.

Click the check box to enable IEEE 802.1x

authentication function. Refer to 4.17 What is 802.1x

Authentication?

Authentication Type

Click to select the authentication type in Open

System, Shared Key or Auto selection.

Key Length Select the WEP shared secret key length from

pull-down menu. The length can be chose between

64-bit and 128-bit (known as “WEP2”) keys.

The WEP key is composed of initialization vector (24

bits) and secret key (40-bit or 104-bit).

Key Format Select the WEP shared secret key format from