User`s manual

button to install the TCP/IP protocol, it may need the Microsoft Windows CD to

complete the installation. Close and go back to Network dialog box after the

TCP/IP installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

9 IP Address: 192.168.10.1, any IP address within 192.168.10.1 to

192.168.10.253 is good to connect the Wireless LAN Access Point.

9 IP Subnet Mask: 255.255.255.0

8. Click OK to complete the IP parameters setting.

For OS of Microsoft Windows Vista:

1. Click the Start button and select Settings, then click Control Panel. The

Control Panel window will appear.

2. Move mouse and double-click the right button on Network Connections item.

The Network Connections window will appear. Double click Local Area

Connection icon, then User Account Control window shown. Right click

Continue button to set properties.

3. In Local Area Connection Properties window, Choose Networking tab,

move mouse and click Internet Protocol Version 4 (TCP/IPv4), then click

Properties button.

4. Move mouse and click General tab, Select Specify an IP address and type in

values as following example.

9 IP Address: 192.168.10.1, any IP address within 192.168.10.1 to

192.168.10.253 is good to connect the Wireless LAN Access Point.

9 IP Subnet Mask: 255.255.255.0

5. Click OK to complete the IP parameters setting.

3.2 Connect to the WLAN Broadband Router

Open a WEB browser, i.e. Microsoft Internet Explore 6.1 SP1 or above, then enter

192.168.1.254 on the URL to connect the WLAN Broadband Router.

3.3 Management and configuration on the WLAN Broadband Router

3.3.1 Status

This page shows the current status and some basic settings of the device,

includes system, wireless, Ethernet LAN and WAN configuration information.