User`s manual

3 Software configuration

There are web based management and configuration functions allowing you to have

the jobs done easily.

The WLAN Broadband Router is delivered with the following factory default parameters

on the Ethernet LAN interfaces.

Default IP Address: 192.168.10.1

Default IP subnet mask: 255.255.255.0

WEB login User Name: <admin>

WEB login Password: <raytalk>

3.1 Prepare your PC to configure the WLAN Broadband Router

For OS of Microsoft Windows 95/ 98/ Me/XP:

1. Click the Start button and select Settings, then click Control Panel. The Control

Panel window will appear.

Note: Windows Me users may not see the Network control panel. If so, select

View all Control Panel options on the left side of the window

2. Move mouse and double-click the right button on Network icon. The Network

window will appear.

3. Check the installed list of Network Components. If TCP/IP is not installed, click

the Add button to install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add

button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK

button to install the TCP/IP protocol, it may need the Microsoft Windows CD to

complete the installation. Close and go back to Network dialog box after the

TCP/IP installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

9 IP Address: 192.168.10.1, any IP address within 192.168.10.1 to