User Manual
8 DPSK
Maximum carrier frequency stability w
0
- 2 -
< ±10 for all blocks
kHz
8 DPSK
Maximum carrier frequency stability w
i
- 6 -
< ±75 for all packets
kHz
8 DPSK
Maximum carrier frequency stability | w
0
+ w
i
|
- 8 -
< ±75 for all blocks
kHz
RMS DVEM -
7
- < 20 %
99% DEVM -
13
- < 30 %
π/4 DQPSK
Modulation Accuracy
Peak DEVM -
19
- <
35 %
RMS DVEM -
7
- < 13 %
99% DEVM -
13
- < 20 %
8 DPSK
Modulation Accuracy
Peak DEVM -
17
- < 25 %
F>F
0
+3 MHz
- <-50 -
< -40
dBm
F<F
0
-3 MHz - <-50 -
< -40
dBm
F=F
0
-3 MHz - -46 -
< -40
dBm
F=F
0
-2 MHz - -34 -
< -20
dBm
F=F
0
-1 MHz - -35 -
< -26
dBm
F=F
0
+1 MHz - -35 -
< -26
dBm
F=F
0
+2 MHz - -31 -
< -20
dBm
In-band spurious emissions
F=F
0
+3 MHz - -33 -
< -40
dBm
EDR Differential Phase Encoding No
Errors
> 99 %
Receiver , VDD = 3.3V Temperature =+20°C
Modulation Min.
Typ. Max. Bluetooth
Specification
Unit
π/4 DQPSK
- -87 -
< -70
dBm Sensitivity at 0.1% BER
8 DPSK - -78 -
< -70
dBm
π/4 DQPSK
- -8 -
> -20
dBm Maximum received signal level at
0.1% BER
8 DPSK - -10 -
> -20
dBm
π/4 DQPSK
- 10 -
< +13
dB C/I co-channel at 0.1% BER
8 DPSK - 19 -
< +21
dB
π/4 DQPSK
- -10 -
< 0
dB Adjacent channel selectivity C/I
F=F
0
+1 MHz
8 DPSK - -5 -
< +5
dB
π/4 DQPSK
- -11 -
< 0
dB Adjacent channel selectivity C/I
F=F
0
-1 MHz
8 DPSK - -5 -
< +5
dB
π/4 DQPSK
- -40 -
< -30
dB Adjacent channel selectivity C/I
F=F
0
+2 MHz
8 DPSK - -40 -
< -25
dB
π/4 DQPSK
- -23 -
< -20
dB Adjacent channel selectivity C/I
F=F
0
-2 MHz
8 DPSK - -20 -
< -13
dB
π/4 DQPSK
- -45 -
< -40
dB Adjacent channel selectivity C/I
F=F
0
+3 MHz
8 DPSK - -45 -
< -33
dB
π/4 DQPSK
- -45 -
< -40
dB Adjacent channel selectivity C/I
F=F
0
-5 MHz
8 DPSK - -45 -
< -33
dB
F
0
= 2405, 2441, 2477 MHz
π/4 DQPSK
-20
< -7
dB Adjacent channel selectivity C/I
F=F
image
8 DPSK -15
< 0
dB
Note :
Measurement made using a POWER_TABLE entery of TX_PRE 80, INT PA63, EXT PA255. This ensures that the
Bluetooth requirements for ACP and those defined by the FCC and ETSI are satisfied over the operating
temperature rang of -5℃
℃℃
℃to
+45℃
℃℃
℃. Although the design is capable of generating in excess of +18dBm, regulatory
compliance over the full temperature range of -5℃
℃℃
℃ to +45℃
℃℃
℃ will not be satisfied if the transmit power
approaches this value.