TV Transmitter User Guide | Master
Content Before you start Included in delivery Components 3 4 4 Getting started Connecting to power supply Connecting to audio devices Pairing the transmitter 5 5 6 7 Daily use Using the transmitter LED status indication 8 8 9 Important safety information Personal safety Product safety 11 11 13 Important information Explanation of symbols Maintenance and care Disposal information Conformance information 15 15 16 16 16 2
Before you start The transmitter is an accessory for our remote controls with audio streaming capability. The transmitter connects TV, stereo, or MP3 player as well as many other electronic devices without Bluetooth®* functionality to the remote control for your hearing instruments. Using the transmitter you will wirelessly stream sounds directly into the hearing instruments. CAUTION Read this user guide thoroughly and completely and follow the safety information in this document to avoid damage or injury.
Included in delivery ● ● ● ● ● ● Transmitter Power plug with different adapters USB power cable Audio cable with 3.5 mm stereo plugs Adapter RCA (cinch) to 3.5 mm stereo socket TOSLINK cable Components ➊ On/off button ➍ TOSLINK connection ➋ LED status indicator ➎ Connection for standard (green, blue, orange) ➌ Volume buttons line‑in devices with 3.
Getting started Connecting to power supply NOTICE Please make sure that the power plug is easily accessible to remove it from power supply if necessary. Only use the USB power cable and power adapter that came with the device. Select the adapter that is used in your country. X Connect the micro USB side of the USB power cable to the transmitter ➊. X Connect the other side of the USB power cable to the power plug ➋. X Connect the power plug to the power supply ➌.
Connecting to audio devices Use the supplied cables and adapters. Further information: ● When using the TOSLINK cable: ● Before connecting the cable, remove the protection caps from the TOSLINK cable plugs. ● To prevent the TOSLINK cable from breaking, do not forcefully bend it. ● Set the output format of the TV or audio device to "uncompressed PCM audio" (PCM = pulse-code modulation). Compressed audio format (like surround sound) is not supported by the transmitter.
signal of this device will be streamed to your hearing instruments. The audio signal of the other device will not be streamed. Pairing the transmitter The remote control for your hearing instruments has to be paired once with the transmitter. X Follow the instructions in the remote control's user guide.
Daily use Using the transmitter X Check if the green LED shines (transmitter is turned on and ready for audio streaming). to turn the transmitter If the green LED is off, press on. X To start audio streaming, use the remote control for your hearing instruments: Set up the remote control for your hearing instruments so that audio streaming with our transmitters is active. Follow the instructions in the remote control's user guide. , audio streaming When the blue LED shines is active.
LED status indication Green LED on ➧ Transmitter is on. It is ready for pairing or audio streaming. Green LED off ➧ Transmitter is off. The blue LED shows the status of the Bluetooth connection between transmitter and remote control for your hearing instruments. Blue LED on ➧ Audio streaming is active. Blue LED off ➧ No audio streaming is active.
The orange LED shows the status of the TOSLINK connection. Steady orange light ➧ TOSLINK cable is connected and audio signal in the required format is available. Refer to section "Connecting to audio devices". Flashing ➧ TOSLINK cable is connected, but the audio signal has the wrong format. Refer to section "Connecting to audio devices". Orange LED off ➧ No TOSLINK cable is connected or the cable is not connected properly. ➧ TV or audio device is switched off. ➧ TOSLINK cable is broken.
Important safety information Personal safety WARNING Choking hazard! Your device contains small parts which can be swallowed. X Keep hearing instruments, batteries and accessories out of reach of children and mentally disabled persons. X If parts have been swallowed consult a physician or hospital immediately. WARNING Risk of electrical shock! X Do not use obviously damaged devices and return them to point of sale.
WARNING Risk of electric shock! X Connect audio input only to a device conforming to IEC 60065, the IEC-Norm for audio, video and other electronic devices. WARNING Interference with implantable devices X The device can be used with all electronic implants that comply with the ANSI/AAMI/ISO 14117:2012 Electromagnetic compatibility standard for human implants.
Product safety NOTICE X Protect your devices from extreme heat. Do not expose them to direct sunlight. NOTICE X Protect your devices from high humidity. NOTICE X Do not dry your devices in the microwave oven. NOTICE Different types of strong radiation, e. g. during X-ray or MRI head examinations, may damage devices. X Do not use the devices during these or similar procedures. Weaker radiation, e. g. from radio equipment or airport security, does not damage the devices.
NOTICE Your hearing instruments are designed to comply with international standards on electromagnetic compatibility but interference with nearby electronic devices could occur. In this case, move away from the source of interference.
Important information Explanation of symbols Symbols used in this document Points out a situation that could lead to serious, moderate, or minor injuries. Indicates possible property damage. Advice and tips on how to handle your device better. Symbols on the device or packaging CE compliance label, confirms compliance with certain European Directives, refer to section "Conformance information". EMC and radio communications compliance label Australia, refer to section "Conformance information".
Maintenance and care NOTICE X Do not put your device in water! X Do not clean your device with alcohol or benzine. X Clean the device as necessary with a soft tissue. X Avoid abrasive cleaning liquids with additives such as citric acids, ammonia, etc. Disposal information Recycle devices, accessories and packaging according to local regulations.
Wireless functionality FCC: QWOB8Z869 IC: 4460A-B8Z869 FCC and ISED compliance information can be found on the back of the device. indicates conformity The ACMA compliance mark with the electromagnetic interference standards set by the Australian Communications and Media Authority (ACMA). Devices with the FCC marking comply with the standards of the FCC regarding electromagnetic interference. This Class B digital apparatus complies with Canadian ICES‑003.
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Radiation exposure statements This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Bluetooth radio frequency band All channels supported from 2402 MHz to 2480 MHz with channel centers at every 1 MHz (2402 MHz, ..., 2479 MHz, 2480 MHz) i.e. 79 channels. Risk mitigations (for internal use only) Bluetooth radio frequency band.............
Legal Manufacturer Signia GmbH Henri-Dunant-Strasse 100 91058 Erlangen Germany Phone +49 9131 308 0 Manufactured by Signia GmbH under Trademark License of Siemens AG. Document No. 02992-99T##-#### ## Order/Item No. ### ### ## Master Rev01, 06.2016 © Signia GmbH, ##.2016 www.signia-hearing.
