USER MANUAL RaySafe X2 View
© 2014.01 Unfors RaySafe 5001089-2 All rights are reserved. Reproduction or transmission in whole or in part, in any form or by any means, electronic, mechanical or otherwise, is prohibited without the prior written consent of the copyright owner.
RaySafe X2 View User Manual – Contents CONTENTS PROGRAM OVERVIEW.............................................................................................4 IMPORT MEASUREMENTS..................................................................................... 5 Import as you measure.................................................................................... 5 Import from base unit......................................................................................
RaySafe X2 View User Manual – Program overview PROGRAM OVERVIEW RaySafe X2 View is suitable for • viewing and analyzing measurement data and waveforms • storing measurements • transferring data to Excel or other software • updating the base unit software. 3 1 4 2 5 6 Figure 1. The main window 1. RaySafe X2 status, shows connections to other parts of the RaySafe X2 system. 2. Excel area, manages export of measurements to Excel (see “Export to Excel” (11)). 3.
RaySafe X2 View User Manual – Import measurements IMPORT MEASUREMENTS IMPORT AS YOU MEASURE Connect the base unit to X2 View with a USB cable. Figure 2. Connect base unit with X2 View X2 View will show the status of the connected instrument in the setup panel to the left. Figure 3. X2 setup panel All new measurements will now be added to the measurement list in X2 View.
RaySafe X2 View User Manual – Import measurements IMPORT FROM BASE UNIT If you have measurements in a base unit, follow this instruction to import them to X2 View: 1. Connect the base unit to the computer running X2 View. 2. Select File – Import from base unit in the menu or press F8. 3. Select the measurement series you want to import and click Import selected. (Import all imports all measurements made the selected day.) Figure 4.
RaySafe X2 View User Manual – Import measurements If no base units are found, try searching by selecting Search in the Bluetooth menu. NOTE! If Bluetooth does not appear in the Connections area, your Bluetooth solution is not compatible with RaySafe X2. Try using a different Bluetooth adapter on your computer.
RaySafe X2 View User Manual – View measurements VIEW MEASUREMENTS VIEW MEASURED VALUES You can view all measurements in a list overview, or focus on one measurement at a time. Toggle between the views using the buttons in the measurement panel: Figure 5. List view of measurements Figure 6. Single measurement view You can also enlarge one parameter to be able to see the value from a longer distance. Click on a parameter to enlarge, click again to see all parameters. Figure 7.
RaySafe X2 View User Manual – View measurements Figure 8. Starred measurements Every measurement has an associated note field. The notes are saved along with the measurements, and are also exported to Excel. Figure 9. Information panel with Notes field VIEW WAVEFORMS Click on a measurement to see its waveforms. The waveforms area consists of the waveforms and check boxes for showing/hiding the different waveforms.
RaySafe X2 View User Manual – View measurements Figure 11. Waveforms with a part selected You can save or copy the waveform as an image (png format) using the right click menu in the waveforms area.
RaySafe X2 View User Manual – Export measurements EXPORT MEASUREMENTS EXPORT TO EXCEL Figure 12. Excel export panel EXPORT TO EXCEL AS YOU MEASURE Follow the steps below to export each new measurement to Excel: 1. Click Connect in the Excel area. 2. Select Excel settings (workbook, sheet, start cell). 3. Verify that the box Automatically export to Excel is checked.
RaySafe X2 View User Manual – Export measurements 2. Select Excel settings (workbook, sheet, start cell). 3. In the drop down list, select what to export: Selected, All, Starred or the Waveforms of the selected measurement. 4. Press the Export button. EXPORT WAVEFORMS TO EXCEL Use the Excel Export button to export waveforms: 1. Click Connect in the Excel area. 2. Select Excel settings (workbook, sheet, start cell). 3. In the drop down list, select Waveforms. 4. Press the Export button.
RaySafe X2 View User Manual – Export measurements EXPORT WAVEFORM IMAGE Right click in the waveform area and select Save as image to save the waveform in png format or select Copy to put it as an image in the clipboard, for pasting into a document. Figure 13. Waveform, with a certain part zoomed in, copied in png format SAVE FILE Click File – Save in the menu, or press Ctrl+S, to save a file with all measurements, notes and stars.
RaySafe X2 View User Manual – Manage the RaySafe X2 system MANAGE THE RAYSAFE X2 SYSTEM CHANGE PROGRAM SETTINGS Click File – Settings or press F4 to reach the program settings under the General tab. Figure 14. Program settings window The main difference between the standard and the RaySafe Xi View export format is the order of the columns. Select RaySafe Xi View format for backward compatibility with your old Xi View Excel templates. Change the desired settings and click Save.
RaySafe X2 View User Manual – Manage the RaySafe X2 system CHANGE INSTRUMENT SETTINGS You can only change settings for a connected sensor. Click File – Settings or press F4 to reach the detector settings. For explanations of the different instrument settings, see the information texts in the base unit. Figure 15. Sensor settings window Change the desired instrument settings and click Save.
RaySafe X2 View User Manual – Manage the RaySafe X2 system UPDATE THE RAYSAFE X2 SYSTEM X2 View will automatically connect to X2 Online when your computer is connected to the internet. The X2 Online field will show a notification icon if there are any updates available for you. Figure 16. Update notification to the right Click on the icon to go to the update window (below). Click Update to download and install the update or Cancel to postpone the update. Figure 17.
RaySafe X2 View User Manual – Hints HINTS TROUBLESHOOTING No instrument is shown in the RaySafe X2 status area, even if a base unit is connected. Disconnect and reconnect the base unit to the computer, using the USB cable. X2 Online does not appear in the RaySafe X2 status area. Make sure that the computer running X2 View is connected to the internet.
RaySafe X2 View User Manual – Hints MOUSE EVENT ACTION Mouse wheel up in waveforms area Zoom in Mouse wheel down in waveforms area Zoom out Double click in waveforms area Reset zoom Left click and drag in waveforms area Pan Shift+left click and drag in waveforms area Mark a section Ctrl+left click and drag in waveforms area Select a region to zoom in to Right click Open a menu in the measurement or waveforms area TECHNICAL SUPPORT Please don’t hesitate to contact our support desk if you hav
