Owner's manual

THE RAYSAFE SOLO
The RaySafe Solo consists of a base unit and a detector.
Communication between detector and base unit is purely digital, thereby minimizing sensitivity to mechanical
or electrical stress.
THE RAYSAFE SOLO DETECTOR OPTIONS
• The R/F detector has two sensors: R/F high is designed for conventional, high dose rate measurements.
R/F low is designed for low dose rate measurements. The RaySafe Solo R/F base unit can be equipped with
mA/mAs capabilities.
• The MAM detector is used for both low and high dose rates generated in mammography applications.
• The MAM dose detector is a Solo MAM detector, but measures only dose, dose rate and time.
• The Dose detector is an R/F detector, but measures only dose, dose rate, time and pulses.
• The RAD detector is designed for conventional, high dose rate measurements normally generated without a
phantom between the detector and the X-ray source.
• The CT detector is an ionization chamber, designed to measure CT dose for applications such as Dose
Length Product (DLP) and Computed Tomography Dose Index (CTDI).
• The DENT detector is designed for measurements on intraoral dental X-ray machines, OPG and Cone beam.
• The light detector is designed to measure luminance on LCD and CRT monitors, as well as light boxes, and
illuminance for diagnostic X-ray applications.
• There is also a RaySafe Solo mAs model for measuring mA/mAs, time and pulses.
6
RaySafe Solo User Manual – The RaySafe Solo