User guide

35
RaySafe i2 dose manager user manual – Use dose manager
Figure 20. Dosimeter settings Dose tab
Dose tab – View the current accumulated dose for the dosimeter and reset Dose Session 1 and 2. The action
reset Dose Session is applied immediately and also exits the dialog.
4. Wait for a few seconds before you remove the dosimeter from the cradle after you have saved the
changes.
COLLECT DATA FROM DOSIMETER
Follow the instructions below to collect data from a dosimeter:
1. Make sure that a cradle is connected to your computer’s USB port.
2. Insert a dosimeter in the cradle.
The computer will detect the dosimeter automatically and the dosimeter information will appear in dose
manager.