Instruction Manual

Specification
Model
SDC25-BH
SDC25-EH
Function
2-in-1(Single color/CCT)
Single color
Inputvoltage
DC 48V
OutputVoltage
DC 0-46V
Outputcurrent
0-700mA
Maxoutputpower
25W
Communicationmode
Digital Power Line Communication
Outputcurrentsetting
100-700mA programmable＠1mA step
Fadetimesetting
0-25.5s with 0.1s step
Outputcurrenttrimming
100%-50% with 5% step
Dimmingcurvesetting
Linear, Logarithm, Optimized logarithm
Workingtemperature
-20°C~+50°C
Dimension
70x17x11.5mm(Cable excluded)
54
6. Output current trimming
Besides the output current setting, the output current
also can be trimmed from 100% to 50% of the rated
current at 5% step. With this feature, the LED current and
light luminance can be matched preciously. Please refer to
the master driver’s instruction for detailed operation.
7. ON/OFF fade time adjust
The on/off fade time can be adjusted in range of 0-
25.5s from the master driver. Please refer to the master
driver’s instruction for detailed operation.
The dimming curve can be changed from Logarithm,
Linear and Optimized logarithm. Please refer to the
master driver’s instruction for detailed operation.
8. Change dimming curve
The slave drivers connected to same master driver can
be programmed to different zones. User can adjust the
brightness or color temperature of each zone individually.
Please refer to the master driver’s instruction for detailed
operation.
9. Program the salve driver zone
Advanced features
5. Change rated output current
The output current can be set from the master driver
via smart app, the adjustable range of output current value
is 100-700mA. Please refer to the master driver’s
instruction for detailed operation.