User Manual

ManualsBrandsRayRun ManualsLED ControllerRayrun MP10 Umi Smart Wireless LED Controller

Table Of Contents

1. Power supply input

The controller supply voltage range is from DC 6V to

24V. The red power cable should be connected to power

positive and black to negative. (For other cable color,

please refer to the labels). The LED output voltage is at

same level as the power voltage, please make sure the

power supply voltage is correct and the power rating is

capable for the load.

2. LED output

Connect constant voltage LED loads to these cables.

Please make sure the LED rated voltage is same as the

power supply and each channel’s maximum load current

is in range of the controller rated current.

Please refer to following output wiring diagram for

different models:

Single color: red cable to LED  and black to  .

Tunable white: black cable to LED , white to cool

white  and yellow to warm white  . The two black

cables are connected inside the controller.

RGB and RGBW: black cable to LED , R, G, B and W

cable to the relevant color  .

3. Work status indicator

This indicator shows all working status of the

controller. It displays different events as following:

Steady blue: Normal working.

Short white blink: Command received.

White blink for 3 times: Identification or

confirmation.

Single yellow flash : Edge of the content.

Red flash: Overload protection.

Yellow flash: Overheat protection.

Green blink: Timing play activated.

Model: MP10 / MP20 / MP30 / MP40 (-A/T/S)

cool

warm

G R B WGRB

Single color Tunable white RGB RGBW

Full Protection

Waterproof

To 110/230

AC power

6-24V DC output

Power supply

LED Controller

6-24V DC

Constant voltage

LED load

86mm

21mm

64mm

1 2

* Picture for RGBW model

LED Controller

Umi Smart Wireless

Single color to RGBW Model

Remote + Smartphone

Timing / Waterpoof

Group / Scene

Ultra Compact

BLE Mesh

Remote and Phone

Group / Scene

This series LED controllers are designed to drive

constant voltage LED products in voltage range of DC6-

24V. They can be controlled by the Umi compatible remote

controllers and Smartphone app (-A version). With

advanced BLE mesh technology, controllers can work

synchronously with a robust connection. For option, IP68

waterproof feature is available on -S version, and timing

play function is available on -T version.

Introduction

Function & Size

Umi wireless

remote controller

Umi Smart App

(-A & T version)

Wiring

Please connect the controller output to LED loads

and power supply to the controller power input. The

power supply voltage must be same as the LED load's

rated voltage. Check all cables to be well connected

and insulated before power on.

MP40

Application

CH1

(white cable)

CH2

(green cable)

CH3

(red cable)

CH4

(blue cable)

Single color

White

CCT

Cool white

Warm white

RGB

No use

Green

Red

Blue

RGBW

White

Green

Red

Blue

Model MP40-A and MP40-T can be configured to

different application for single color, CCT, RGB or RGBW.

For different application, the 1-4 channel function is

mapped as following table:

Summary of content (2 pages)

PAGE 1
Introduction Umi Smart Wireless This series LED controllers are designed to drive constant voltage LED products in voltage range of DC624V. They can be controlled by the Umi compatible remote controllers and Smartphone app (-A version). With advanced BLE mesh technology, controllers can work synchronously with a robust connection. For option, IP68 waterproof feature is available on -S version, and timing play function is available on -T version.
PAGE 2
Operation 7. Waterproof (-S version) 4. Pairing remote controllers The IP-68 waterproof feature with glue injection finish is available on -S version controllers. For overall waterproof performance, the cables must be waterproof treated separately. The controller can be paired with compatible Umi remote controller for operation. To pair or unpair the remote controller, user needs to connect and disconnect the power of controller and press specific combo keys on the remote controller.