Datasheet

ManualsBrandsRaypak ManualsHardwareY-200

Catalog No: 5000.63B

Effective: 5-1-08

Replaces: 2-1-05

P/N 241252 Rev. 2

LonWorks Module

For use with

Y-200 Series Electronic Boiler Sequencer

& Outdoor Reset Control System

Installation and Operating Manual

Summary of content (8 pages)

PAGE 1
Catalog No: Effective: Replaces: 5000.63B 5-1-08 2-1-05 LonWorks Module For use with Y-200 Series Electronic Boiler Sequencer & Outdoor Reset Control System Installation and Operating Manual P/N 241252 Rev.
PAGE 2
PAGE 3
Installation and Operating Manual Y-200 LonWorks Module Contents Introduction Introduction .................................................................. 1 The Raypak® Y-200™ Series Controller with the Echelon® LonWorks® Module provides the ultimate in monitoring and control for Raypak heater applications. The LonWorks networking node can be integrated with other LonWorks systems to form total building control solutions. Important Safety Instructions ......................................
PAGE 4
Y-200 LonWorks Module Installation and Operating Manual Installation 1. Turn off the power to the Y-200. 2. Open the front cover of the Y-200. 3. Open the “Display and Keypad” door to gain access to the Y-200 Control Board and LonWorks Module mounting location. 4. Plug LonWorks Module onto the P1 & P2 connectors on the Y-200 Control Board. (See diagram below.) 5. Connect communication cabling to the 2-pin connector J13 (LonWorks connection). (See diagram below.) 6.
PAGE 5
Installation and Operating Manual Y-200 LonWorks Module System Start-Up Procedure LonMark Product Details After installation has been completed power can be restored to the Y-200. NOTE: If further instruction is required for screen displays refer to the Y-200 Installation and Operating Manual, P/N 241125, Catalog No. 5000.62. Manufacturer: Raypak, Inc. Product Datasheet: Y-200 Boiler Controller (PDF) 1.
PAGE 6
Y-200 LonWorks Module Installation and Operating Manual LonWorks Table of Communication Item Description Y-200 Screen Value Functions Direction to Y-200 SNVT NVIDX SNVT # 1 Boiler Enable To enable or disable Y-200 Input nviBoilerEnable 19 2 Boiler Command To enable or disable Y-200 Input nviBoilerCmd 21 3 Set Point 2 40 - 220°F Input nciHeatSetpt 6 4 Set Point 2 40 - 220°F Input nciSetpoint 25 5 MAX Temp 8 220°F High water temperature limit Input nciHeatSetupMax 9
PAGE 7
LIMITED WARRANTY Y-200 LonWorks Module for Y-200 Series Electronic Boiler Sequencer & Outdoor Reset Control System SCOPE OF WARRANTY Raypak, Inc. ("Raypak") warrants to the original owner the Control System to be free from defects in materials and workmanship under normal use and service for the applicable warranty period.
PAGE 8
www.raypak.com Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (805) 278-5300 Fax (805) 278-5468 Litho in U.S.A.