Product specifications

T-3 (Raypak B6000 System Protocol Interface)

Contents Quantity

FLOPPY DISK 3.5” 1

T-3 1

EPROM (CPX.XNMn) in small black ESD box 1

Check packaging for damage or missing components.

IMPORTANT NOTICE: These instructions are intended for the use by qualified

personnel only, specifically trained and experienced in the installation of this type

of equipment and related system components. Installation and service person-

nel may be required by some states to be licensed. If your state is such, be sure

your contractor bears the appropriate license. Only qualified persons shall at-

tempt to repair this equipment. Repair must be according to these instructions.

WARNING: Improper installation, adjustment, alteration, service or maintenance

may damage the equipment, create a hazard resulting in asphyxiation, explo-

sion, fire electric shock, personal injury or property damage and will void the

warranty.

CAUTION: ONE SUPPLY SOURCE. TO REDUCE THE RISK OF ELECTRIC

SHOCK, DISCONNECT ALL CONNECTIONS BEFORE SERVICING.

CAUTION: RISK OF ELECTRIC SHOCK, DISCONNECT SWITCH IS RE-

QUIRED TO DE-ENERGIZE THE EQUIPMENT BEFORE SERVICING.

Thank you for selecting the Raypak B6000 Boiler Management System and the Raypak

Communication Interface. It is our sincere hope that you will enjoy its power, ease of use and

energy saving features.

Please follow the instructions carefully to insure proper installation.

FORWARD

The Raypak Communication Interface is designed to allow the Communication Interface Sys-

tem to monitor and control the Raypak B6000 Boiler Management System.