Operation Guide

X-C13SG_REV1.6_Operation Guide

X-C13SG

Shanghai RaymonIoT Technology Co., Ltd.

4. TEST CASE

4.1. Throughput Transmission of UART and Wi-Fi Module in AP Mode

The test topology is as follows:

► After power-on, the Power light is on, the Ready light is on, and the module is working properly.

► After the computer Wi-Fi searches for the AP hot spot of this device, it connects.

► Open NetAssist, create a TCP client, fill in the module's IP address and TCP information (AP IP:

192.168.1.254, TCP Server, 8899 port, use AT+WALAN, AT+SOCKA to change these default parameters), click

【Connect】establish connection..