Operation Guide

X-C13SG_REV1.6_Operation Guide

X-C13SG

Shanghai RaymonIoT Technology Co., Ltd.

l Open SecureCRT, connect PC COM, baud rate set to 230400,8,1,None. Deselect RTS/CTS;

l Press down and hold X-C1x EVK Reload button(IO3), click Reset button(or any other reboot

operation), and then press the keyboard space button to enter the serial port bootloader interface.It

will show X-C1x-2MB Bootloader UI.

Note:

² 命令’B’: Clear all setting parameters, including factory parameters

² 命令’S’: Upgrade the application firmware

² 命令’G’: Execute the application frmware

l Enter the command 'S' to upgrade the application, the screen displays Ready, wait for the character

‘C’ to appear, select the file to be upgraded using Xmodem, and upgrade the file example: