Operation Guide

X-C13SG_REV1.6_Operation Guide

X-C13SG

Shanghai RaymonIoT Technology Co., Ltd.

Format:

Query Operation:

AT+BLEADP<CR>

+ok=<value><CR>< LF><CR>< LF>

Set Operation:

AT+BLEADP=<value><CR>

+ok<CR>< LF><CR>< LF>

Parameters:

value: IntervalMin+IntervalMax+Type+Channel, Format: AAAABBBBCD, Default 值 0768128007

IntervalMin: advertising minimum interval, AAAA position decimal value, 0768 x 0.625ms=480ms,

IntervalMax: advertising maximum interval, BBBB position decimal value, 1280 x 0.625ms=800ms

Type: 0 or 1, 0 for public, 1 for random

Channel: advertising channel, 3bit hex value, bit0 for channel37, bit1 for channel38, bit2 for channel39,

value 7 is using all channel (37, 38 and 39).

1.3.3.91. AT+BLEADV

Function: Config/Query BLE advertising content

Format:

Query Operation:

AT+BLEADV<CR>

+ok=<value><CR>< LF><CR>< LF>

Set Operation:

AT+BLEADV=<value><CR>

+ok<CR>< LF><CR>< LF>

Parameters:

value: advertising content, maximum is 14 bytes together with BLE name, hex format, content must obey

the standard BLE protocol

1.3.3.92. AT+RFTESTSIGNAL

Function: Production test mode, scanning specified AP signal

Format:

Set Operation:

AT+RFTESTSIGNAL=<ap_site,ret><CR>

+ok=<status><CR><LF><CR><LF>

Parameters: