Operation Guide

© 2022 Shanghai RaymonIoT Technology Co., Ltd.
X-C13SG_REV1.6_Operation Guide
X-C13SG
Shanghai RaymonIoT Technology Co., Ltd.
40
Format:
Query Operation:
AT+BLEINDUUIDR<CR>
+ok=<uuid><CR>< LF><CR>< LF>
Set Operation:
AT+BLEINDUUIDR=<uuid><CR>
+ok<CR>< LF><CR>< LF>
Parameters:
uuid: BLE indication receiveUUID
Default value
AT+BLEINDUUIDR
+ok=0000FED600001000800000805F9B34FB
1.3.3.88. AT+BLEINDUUIDW
Function: Config/Query BLE indication Write UUID.
Format:
Query Operation:
AT+BLEINDUUIDW<CR>
+ok=<uuid><CR>< LF><CR>< LF>
Set Operation:
AT+BLEINDUUIDW=<uuid><CR>
+ok<CR>< LF><CR>< LF>
Parameters:
uuid: BLE indication write UUID
Default value:
AT+BLEINDUUIDW
+ok=0000FED500001000800000805F9B34FB
1.3.3.89. AT+BLECON
Function: Config/Query BLE connection parameters.
Format:
Query Operation:
AT+BLECON<CR>
+ok=<value><CR>< LF><CR>< LF>
Set Operation:
AT+BLECON=<value><CR>
+ok<CR>< LF><CR>< LF>
Parameters:
value: IntervalMin+IntervalMax+Slave Latency+connSupervision Timeout, Format: AAAABBBBCDDDD,
Default 值 0016003200200
IntervalMin: Connection minimum interval, AAAA position decimal value. 0016 x 1.25ms=20ms, minimum
is 0016, that is 20ms
IntervalMax: Connection maximum interval, BBBB position decimal value. 0032 x 1.25ms=40ms, max
0800, that is 1000ms.
connSupervision timeout: Connection time out, DDDD position decimal value, actual timeout of 0200 is
0200 x 10ms=2000ms.
1.3.3.90. AT+BLEADP
Function: Config/Query BLE advertising parameters