Operation Guide

X-C13SG_REV1.6_Operation Guide

X-C13SG

Shanghai RaymonIoT Technology Co., Ltd.

EN: English

1.3.3.77. AT+WEBUSER

Function: Set/ Query webpage user name and password; Setting is valid after reset

Format:

Query Operation:

AT+WEBUSER<CR>

+ok=<username,password><CR><LF><CR><LF>

Set Operation:

AT+WEBUSER =<username, password><CR>

+ok<CR><LF><CR><LF>

Parameters:

username: User Name, within 15 characters, not support empty.

password: password, within 15 characters, not support empty.

1.3.3.78. AT+NTPRF

Function: Set /Query time calibration interval

Format:

Query Operation:

AT+NTPRF<CR>

+ok=<num><CR><LF><CR><LF>

Set Operation:

AT+NTPRF=<num><CR>

+ok<CR><LF><CR><LF>

Parameters:

num: time calibration inverval，range:0~720, default:30 minutes, 10 minutes for each step, set 0 means

no time calibration automatically.

1.3.3.79. AT+NTPEN

Function: Enable/Disable time calibration function. Setting is valid after reset.

Format:

Query Operation:

AT+NTPEN<CR>

+ok=<status><CR><LF><CR><LF>

Set Operation:

AT+NTPEN=<status><CR>

+ok<CR><LF><CR><LF>

Parameters:

status: status of time calibration

on: Turn on NTP function.

off: Turn off NTP fucntion

1.3.3.80. AT+NTPTM

Function: Query network time, time zone is GMT+8 by default

Format:

Query Operation:

AT+NTPTM<CR>