Operation Guide

© 2022 Shanghai RaymonIoT Technology Co., Ltd.
X-C13SG_REV1.6_Operation Guide
X-C13SG
Shanghai RaymonIoT Technology Co., Ltd.
36
+ok=<heartbeat,QoS><CR>< LF><CR>< LF>
Set Operation:
AT+MQPARAE=<heartbeat,QoS><CR>
+ok<CR>< LF><CR>< LF>
Parameters:
heartbeat: MQTT heartbeat time, default is 60, range 0~300
QoS: MQTT QoS, default is 0, range 0,1,2
1.3.3.74. AT+MQID
Function: Set/query SOCKA MQTT login content. Setting will take effect after reset
Format:
Query Operation:
AT+MQID<CR>
+ok=<id><CR>< LF><CR>< LF>
Set Operation:
AT+MQID=<id><CR>
+ok<CR>< LF><CR>< LF>
Parameters:
id: Client ID, must be different for each device, recommend to use MAC for this Client ID, max 32
characters. Support %MAC for setting, show real MAC when query.
1.3.3.75. AT+UPGRADE
Function: Set/ Query remote upgrade URL address
Format:
Query Operation:
AT+UPGRADE<CR>
+ok=<url><CR><LF><CR><LF>
设置
AT+UPGRADE =<url><CR>
+ok=<result><CR><LF><CR><LF>
Parameters:
url: The upgrade file url address; the last charter shall be “/” (within 20 characters).
result: the download operation result.
Download failed: Url is error or file is not valid.
Update success: Need reboot to run new the download new firmware.
1.3.3.76. AT+WEBLANG
Function: Set/Query webpage language option
Format:
Query Operation:
AT+WEBLANG<CR>
+ok=<language><CR><LF><CR><LF>
Set Operation:
AT+WEBLANG =<language><CR>
+ok<CR><LF><CR><LF>
Parameters:
language:
CN: Chinese, Default