Operation Guide

© 2022 Shanghai RaymonIoT Technology Co., Ltd.
X-C13SG_REV1.6_Operation Guide
X-C13SG
Shanghai RaymonIoT Technology Co., Ltd.
24
1.3.3.38. AT+WSPS
Function: Set/Query power save parameters.
Format:
Query Operation:
AT+WSPS<CR>
+ok=<ret><CR><LF><CR><LF>
Set Operation:
AT+WSPS=<mode[,time]><CR>
+ok<CR><LF><CR><LF>
Parameters:
ret:
Yes: Disable power save
Auto: Auto power save mode(default), enter power saving mode after receive or send data in time
seconds
No: Enable power save
mode:
Yes: Disable power save
Auto: Auto power save mode(default), enter power saving mode after receive or send data in time
seconds.
No: Enable power save
time: Only valid in auto mode, >=2 integer value, default is 3 seconds. when value is 0, the default waiting
time is still 3 seconds.
1.3.3.39. AT+WAMAC
Function: Set/Query Module AP MAC address parameters.
Format:
Query Operation:
AT+WSMAC<CR>
+ok=<mac_address><CR><LF><CR><LF>
AP MAC is the same as STA
1.3.3.40. AT+WAP
Function: Set/Query AP Wi-Fi parameters. Max support 3 STA connection. Setting is valid after reset.
Format:
Query Operation:
AT+WAP<CR>
+ok=< wifi_mode,ssid,channel ><CR><LF><CR><LF>
Set Operation:
AT+WAP =<wifi_mode,ssid,channel ><CR>
+ok<CR><LF><CR><LF>
Parameters:
wifi_mode: Wi-Fi mode, include:
11B
11BG
11BGN (Default)
ssid: SSID at AP mode, the maximum length is 32..
channel: Wi-Fi channel : AUTO(Default CH1) or CH1~CH11.