Operation Guide

© 2022 Shanghai RaymonIoT Technology Co., Ltd.
X-C13SG_REV1.6_Operation Guide
X-C13SG
Shanghai RaymonIoT Technology Co., Ltd.
16
1.3.3.10. AT+WEL
Function: Set/Query boot welcome message
Format:
Query Operation:
AT+WEL<CR>
+ok=<message><CR><LF><CR><LF>
Set Operation:
AT+WEL=<message><CR>
+ok<CR><LF><CR><LF>
Parameters:
message: Bootup welcome message output, default is product type such as【X-C13SL】, if it is【off】,
means this function be closed, max 10 bytes.
1.3.3.11. AT+EVENT
Function: Set/Query event notification function. Setting is valid after reset.
Format:
Query Operation:
AT+EVENT<CR>
+ok=<status><CR><LF><CR><LF>
Set Operation:
AT+EVENT=<status><CR>
+ok<CR><LF><CR><LF>
Parameters:
status: Enable/Disable event notification function.
off: Disable.
on: Enable event notification function, default value.
Meet with following Wi-Fi and BLE condition, module output UART data initiatively
Event Notification Data
Condition
+EVENT=STA_CON
STATION connect success
+EVENT=STA_DISCON
STATION disconnect
+EVENT=STA_GOT_IP
DHCP got IP
+EVENT=SOCKA_CON
SOCKA connection success in TCP Server mode
+EVENT=SOCKA_DISCON
SOCKA disconnect in TCP Server mode
+EVENT=SOCKB_CON
SOCKB connection success in TCP Server mode
+EVENT=SOCKB_DISCON
SOCKB disconnect in TCP Server mode
+EVENT=BLE_CON
BLE connect success
+EVENT=BLE_DISCON
BLE disconnect
1.3.3.12. AT+FIND
Function: Set/Query WiFi Configuration Password, used for local network search.
Format:
Query Operation:
AT+FIND<CR>
+ok=<char><CR><LF><CR><LF>
Set Operation:
AT+FIND =<char><CR><LF><CR><LF>
Parameters: