Technical data
Table Of Contents
- Chapter 1 Important information
- Chapter 2 Introduction
- Chapter 3 Using your camera
- 3.1 Parts supplied
- 3.2 Camera features and controls
- 3.3 Charging the camera
- 3.4 Switching on and off
- 3.5 Power management
- 3.6 Battery status indicator
- 3.7 Adjusting the display brightness
- 3.8 Changing the display mode
- 3.9 Zooming the display (TH32 model only)
- 3.10 Freezing the display (TH24 model only)
- 3.11 Adjusting the eyepiece diopter setting
- Chapter 4 Troubleshooting and support
- Chapter 5 Technical specification
- Chapter 6 Options and accessories
4.1TH-Seriestroubleshooting
Problemswiththethermalcameraandtheirpossiblecausesandsolutionsaredescribedhere.
ProblemPossiblecausesPossiblesolutions
Thecameraisswitchedoff,orhas
automaticallyshutdown.
Ifnobuttonsarepressedforapproximately5minutes,thecamerawillshut
downautomatically.Toswitchon,pressthePowerbutton.Thecamera
willbereadytouseinapproximately4seconds.
Theinternalbatteryisdischarged.
Chargethecamera,asdescribedinthismanual.Whenfullycharged,the
chargingindicatorislitgreen.
Noimagevisibleondisplay.
Thelenscoverhasnotbeenremoved.
Removethelenscoverfromtheobjectivelensonthefrontofthecamera
whileinuse.Remembertoreplacethelenscoverafteruse,toprotectthe
objectivelensfromdamage.
Thedisplaybrightnessissettoolow.PresstheDisplaybrightnessbuttonseveraltimestoselectanappropriate
brightnesslevel.
Imagetoodarkortoolight.
Thedisplaymodeisnotappropriatefor
thecurrentconditions.
Aparticularenvironmentmaybenetfromadifferentdisplaymodesetting.
Forexample,averycoldbackground(suchasthesky)couldcausethe
cameratouseawidertemperaturerangethanappropriate.Pressthe
Displaymodebuttontocyclethroughthedifferentdisplaymodes.
Imageartifactsvisibleondisplay.
Thecamerawaspointedatanintense
lightsource(suchasthesun),foran
extendedperiod.
Imageartifactswilldisappearintime.Thecameraperiodicallyperforms
automaticcorrectionstoremoveimageartifacts.
22
TH24/TH32handheldthermalcameras–Userreference